Laser · Packaging · Printing · Seals
Every model has its own spec page
From spare lenses to full lines
Each line carries its own models, spec sheets and lead time. Start where your production starts.
CO₂ cutting and engraving, fiber marking, UV crystal, plus lenses, tubes and belts.
Cellophane overwrapping, cream and liquid filling, labeling and vacuum sealing.
Six models buyers ask about most. Every figure below is copied from that model’s own product page.
300 W Acrylic Laser Cutting
300 W CO₂ · 1300 × 900 mm bed · 50 mm acrylic / 30 mm MDF
Textile Laser Cutter
Dual head · 1800 × 1300 mm · Canon camera · automatic feeding
Colour Laser Marking
JPT MOPA source · permanent colour marks on stainless steel and anodised parts
Cream & Liquid, Dual Use
10 – 5000 ml · ±0.5% accuracy · SUS contact parts · pedal or auto mode
Pick by material and we will narrow it to one or two models.
Flatbed CO₂ from 300 W. 1390S for standard sheets, 1325S for full 1300 × 2500 mm boards.
Fiber and MOPA sources for stainless, aluminium and anodised parts. No material removal.
Camera alignment with automatic feeding for rolled cloth, denim and printed patterns.
Overwrapping, filling, labeling and vacuum sealing for boxed retail goods.
No claims we cannot show you on a product page.
Laser, packaging, printing and pump seals ship together — one invoice, one freight booking.
Working area, laser power and material thickness are listed per model, not per brochure.
Lenses, tubes, belts, rotary attachments and seals are stocked as separate products.
Tell us material, thickness and output per hour — we reply with the model that matches.
We focus on providing high performance industrial solutions in reasonable price and superb support service.
Both are 300 W CO₂ machines that cut up to 50 mm acrylic and 30 mm MDF. The 1390S has a 1300 × 900 mm bed for standard sheets. The 1325S has a 1300 × 2500 mm bed for full boards and long signage runs.
The CO₂ flatbeds cut non-metals — acrylic, MDF, wood, leather, fabric. For metal you need a fiber or MOPA marking machine, which marks the surface without cutting through.
No. Our printing range is FDM 3D printers and one heat press. We list only what we actually hold, so nothing on this site is a machine we would have to source elsewhere.
Material, thickness, the largest sheet you need to process, and your target output per hour. A photo of the finished part saves a round of questions.
Yes. Lenses, CO₂ tubes, belts, rotary attachments, fume extractors and pump seals are listed as separate products with their own pages and prices on request.
