Aquila CO2 laser engraving and cutting machines cover wood, acrylic, leather, fabric and paper — from a 500 × 300 mm desktop unit to a 1300 × 2500 mm, 300 W industrial cutter, plus two dual-head fabric systems with automatic feeding and camera alignment.
Desktop — 5030. 500 × 300 mm bed, 40 W or 60 W glass tube (30 W RF option), with water cooling, air assist and exhaust built in. Runs RDWorks or LightBurn over USB, Ethernet or Wi-Fi.
Mid-size — 7045, 9060, 1490. Beds from 700 × 450 mm to 1400 × 900 mm, 60 W to 150 W glass tubes, honeycomb and blade tables in one machine. The 1490 adds a CW5200 chiller and 750 W exhaust for continuous duty.
Industrial — 1325S, 1390S. 1300 × 2500 mm or 1300 × 900 mm beds, 300 W tube, Taiwanese screw transmission, built for signage, LED letters and full-sheet acrylic.
Textile — 1813CA. 1800 × 1300 mm, dual CDWG 100 W or 130 W heads, auto-feeding table and a Canon EOS camera to align cuts with printed patterns.
Send the material and thickness you actually run and we cut a sample, because power demand follows density rather than thickness alone. Then confirm three things: supply voltage (220–240 V 50 Hz or 110–130 V 60 Hz), floor space for loading full sheets, and exhaust routing to outside air.
Q. CO2 or fiber? CO2 for non-metals — wood, acrylic, leather, fabric, paper. Fiber is for bare metal; see our laser marking machines.
Q. Can I test my own material? Yes — send a sample and we return it cut and engraved with the settings used.
Q. Are spare parts available? Yes: CDWG tubes, focus lenses, nozzles, rotary axes and fume extractors are in our laser spare parts range.
Tell us your material, thickness and daily output, and we will point to the smallest machine that does the job — request a quote.
Showing all 8 results








